British imported SDMS MK2 EOD rope hook set

1. Product introduction
 The rope hook set is the most ideal disposal equipment for EOD personnel when disposing of explosives. It avoids direct contact between the EOD personnel and the suspected explosion, and transfers and identifies the suspected explosion through remote operation, thereby effectively ensuring the safety of the EOD personnel. Rope hook tool set: equipped with various ropes, pulleys, fixing tools, clamps, expansion rods, anchor hooks and other tools, which can be assembled and used in conjunction with each other. This model is an enhanced hook and line set of MK2, which has been improved and updated. MK2 has been expanded to include handling a wide range of situations encountered now. The comprehensive package includes two 120m lines that can provide action at a distance, connect the line to all types of equipment objects, and components used to change the direction of a straight line to generate lift, avoid obstacles or obtain safety cover.
 
2. Product configuration list:
1. Box: HAL 2/01 shell x 1 durable plastic Pelican box with wheels. The hinged cover has a toggle latch. Push-in/threaded internal compartment. There are front and side handles.
2. Box size: 1196 (length) x 440 (width) x 168 mm
3. HAL 2/02 reel assembly x 2 reel diameter 300mm. Self-sufficiency. Install the locking brake. Two-stage automatic adjustment anti-bounce brake and rewind handle.
4. HAL 2/03 main line x 1 white (spotted red). The polyamide (Kevlar) rope has a diameter of 5.5 mm and a length of 120 m. Splice to the rotating snap, stretch approximately. 1% full load at 30%. The breaking strength of the rope is 760kg (minimum), the joint is 390kg (typical value), and the catch hook is 100kg (typical value).
5. HAL 2/04 main line x 1 black (spotted red). As HAL 2/03.
6. HAL 2/05 treble hook x 1 tip, treble, barbed barb
7. HAL 2/06 rope x 2 diameter 3mm. Length 2m. Breaking strength 248kg splicing. Pre-stretched polyester rope. The soft eyes form a splicing at both ends.
8. HAL 2/07 rope zipline x 2 diameter 4mm. Length 2m. Breaking strength 396kg splicing. As HAL 2/06.
9. HAL 2/08 rope zipline x 2 diameter 5mm. Length 2m. Breaking strength 550kg splicing. As HAL 2/06.
10. HAL 2/09 wire rope x 2 diameter 1.5mm. Length 2m. The breaking strength is 173kg for splicing. Galvanized steel wire rope. The eye is soft at one end, and the thimble eye ends at the other end.
11. HAL 2/10 line spacing x 2 diameter 2mm. Length 2m. Breaking strength 340kg splicing. As HAL 2/09.
12. HAL 2/11 line spacing x 2 diameter 3mm. Length 2m. Breaking strength 538kg splicing. As HAL 2/09.
13. HAL 2/12 pitons x 21 piton (thin, 60mm shaft) nickel-chromium alloy molybdenum steel. Powerful and reusable. 14. HAL 2/13 Piton x 2 No. 2 piton (slender long rod, diameter 80mm). As HAL 2/12.
14. HAL 2/14 Piton x 2 No.4 pitons (slender, 80mm shaft length) are the same as HAL 2/12.
15. HAL 2/15 pitons x 2 No. 7 piton (extra-long thin type, shaft length 100mm) is the same as HAL 2/12.
16. HAL 2/16 carbine x 2 carbon spring steel carbine. Galvanized. offset. ‘D‘ screw door. 11 mm in diameter. Maximum load 3000kg
17. HAL 2/17 Allen Grip x 2 Steel Alligator jaws with pointed teeth, structure for gripping soft objects, cantilever operation to ensure jaw retention
18. Close under tension. Stainless steel wire protective sleeve for connecting other HAL components. The recommended maximum working load is 25kg.
19. HAL 2/18 suction pad x 1 double suction pad anchor. The vacuum actuator is used to fix smooth surfaces. Double rubber sucker, diameter 120mm
20. Every, alloy body.
21. HAL 2/19 suction cup x 1 single suction cup anchor is the same as HAL 2/18, but single suction cup with steel back.
22. HAL 2/20 impact line x 3, length 2m, diameter 10mm, steel elastic rope hooked at both ends.
23. HAL 2/21 impact line x 3 length 1m, diameter 10mm as HAL 2/20.
24. HAL 2/22 impact line x 1 length 2m, diameter 12mm as HAL 2/20. 2m diameter 12mm Hal 2/20
25. HAL 2/23 impact line x 3 length 1m. The diameter of 12mm is regarded as HAL 2/20.
26. HAL 2/24x 2 stainless steel locking device.
27. HAL 2/25 vise jaw clamp x 2 adaptable vise jaw clamp equipped with positioning eyes. Length 180 mm (7 inches).
28. HAL 07 grab block x 4 spring-type grab block, which can let the production line pass without scaling. Provide lifting or turning facilities. bundle
29. The diameter is 44mm. Closing the spring head will automatically lock the pipeline. Can be used multiple times to provide a mechanical advantage up to 4 inches (see instruction manual). Prove that the test load is 600kg.
30. HAL 08 cable puller x 2 a T-shaped lever with a diameter of 3 to 6 mm.
31. HAL 10 single hook x 2 single handle, ordinary hook. Diameter 12mm
32. HAL 11 single hook x 2 single handle, ordinary hook. The diameter is 25mm. As HAL 10.
33. HAL 16 double hook x 2 double handle, ordinary hook. The diameter is 25mm. As HAL 10. Tilt 35 degrees to produce a half-wrinkle effect.
34. HAL 17 double hook x 2 double handles with barbed hooks. The diameter is 25mm. As HAL10. Tilt at 35 degrees to produce a semi-twill effect.
35. HAL 18 ring x 5 steel ring with internal thread. The diameter is 25mm. Used to combine with hooks.
36. HAL 2/26 Instruction Manual x 1
37. HAL 2/00 Complete MK2 hook and cord set x 1
38. Shape: 135 mm (height) x 1350 mm (width) x 350 mm (depth).
39. Reel (two carry-on bags): 360 mm (height) x 300 mm (width) x 175 mm (depth).
40. Maximum weight: 14kg box (including accessories). The reel (including the main line) is 6 kg each.
41. Total: 26kg.
*Product specifications and descriptions are subject to change without notice.