1. Product introduction:
The radar life detector is a high-tech professional rescue equipment designed for disaster rescue sites such as earthquakes, avalanches, and building collapses. It is mainly based on the time-domain Doppler echo generated by the human body motion on the radar signal to analyze and judge the existence of life bodies in the ruins and the specific location information of the life bodies. At the same time, it uses ultra-wideband electromagnetic pulse signals to penetrate the ruins. Combining with professional radar signal processing algorithms, based on the time-domain Doppler effect generated by weak movements such as human body movement, breathing, heartbeat, body shaking, limb swinging, etc., on the radar echo, it can analyze and judge whether there is a closed area or an invisible area. There is no living organism and its specific location information is calculated through an algorithm, and the test information is displayed on the handheld terminal device. Finally, the function of quickly detecting and searching for survivors in the ruins is realized, helping rescuers to improve rescue efficiency.
The whole device is composed of a radar host and a handheld PDA; it is small in size, light in weight, no probes and cables are required, easy to arrange and operate, accurate in positioning, and meet the requirements of harsh rescue environments.
2. Basic functions:
1. Non-contact detection function: The detector can detect characteristic signals such as breathing or heartbeat of living bodies without digging ruins, digging holes and piercing holes, and without touching living bodies.
2. Wireless control function: The control terminal has the function of controlling the radar host, including: host initialization, start detection, stop and close.
3. Scanning and display function: The detector has the ability to accurately scan the entire detection distance range, and display the detected human movement and breathing results on the screen in different graphics.
4. Automatic judgment function: Automatically judge whether there is a living body through an intelligent algorithm.
5. Data transmission function: wireless data transmission and built-in network port data transmission function.
Three: Product parameters
1. Radar detection mode selection function: with detection mode selection functions such as segmented scanning, air/through walls/ruins, single target/multi-targets, etc.;
2. Detection distance of the partition wall: It should be able to detect the static life body within 25m behind the 55cm thick solid concrete wall and the moving life body within 28m;
3. Detection opening angle: the maximum detection opening angle should be greater than or equal to 120°;
4. Remote control distance: The maximum distance of the display control terminal wireless remote control radar host should be greater than or equal to 100m;
5. Equipped with radar detection and audio and video detection modes to achieve multi-functional use;
6. Detector host: It has the functions of one-key photography, video zoom and storage; the maximum memory supports 256G; the image has 8 times electronic zoom function;
7. Equipped with wire and wireless receiving and display terminals, wireless receiving terminal: ≥10 inches, WiFi transmission mode, with the functions of controlling the front-end host to take pictures, video, lighting and probe rotation;
8. Electric rotating probe, horizontal 360 degree rotation and 90 degree longitudinal electric rotation, no dead angle search;
9. The 120° wide-angle lens makes the detection field wider; 8 high-brightness LED lights, the brightness is adjustable;
10. Continuous working time: ≥8 hours;
11. Shell protection level: IP67;
12. Range of high and low temperature: -10℃~+55℃;
13. Satisfy the vibration test: the frequency is 10Hz~55Hz, the amplitude is 0.35mm, the frequency is swept 3 times in each axial cycle, and each time is 5min;
14. 8-inch physical buttons and touch color high-definition display
15. Resolution: 1920*1080 pixels (PAL), 1920*1080 pixels (NTSC), video output: FBAS signal
16. The image screen supports 8 times digital zoom
17. 4 color rotating camera diameter ≤ 30MM, the industry‘s smallest voice intercom detector, voice intercom probe built-in extremely sensitive omni-directional audio vibration sensor, audio search range ≥ 150 square meters, frequency range 300-5500HZ
18. 1080P full HD probe, photo and video resolution: 1920*1080
19. The probe can be rotated 360 degrees through the hose, no dead angle search
20. 120° wide-angle lens for wider field of view
21. 8 high-brightness LED lights, adjustable brightness
22. The waterproof camera can reach IP67, and the visible distance can reach 8m in the dark and in the dark environment
23. There is a soft connection between the probe and the display, the probe is convenient to move and rotate, and the probe head can be bent freely
Follow us