1. Product description:
The non-magnetic tool set is designed for handling unexploded ordnance in situations where the target may cause or interfere with the magnetic field. The tool set is manufactured, tested and certified to comply with STANAG 2897 Annex C. The entire tool set is packed in a sturdy transport box.
2. Product features:
Non-magnetic tools can work safely in a magnetic field environment. When the EOD personnel dispose of explosives, they can prevent the tools from rubbing against the surface of the object and the sparks generated when they hit the object from exploding, ensuring the safety of the operators. At the same time, it has no effect on the magnetron.
Three, configuration list
1. Tweezers 200mm 1
2. Straight and right-angle probe 187mm 1
3. Knife 185mm 1
4. Scissors 225mm 1
5. Hacksaw frame 500mm 1
6. Hacksaw blade 300mm 1
7. Putty knife/scraper 40mm x 200mm 1
8. Copper wire brush 4mm x 16mm 1
9. Flat-blade screwdriver 3mm x 50mm 1
10. Flat-blade screwdriver 4.5mm x 150mm 1
11. Flat-blade screwdriver 6mm x 100mm 1
12. Flat-blade screwdriver 8mm x 150mm 1
13. Flat-blade screwdriver 10mm x 300mm 1
14. Offset screwdriver 6mm x 150mm 1
15. Offset screwdriver 6mm x 130mm 1
16. Offset screwdriver 10mm x 140mm 1
17. Phillips screwdriver No. 1 1
18. Phillips screwdriver No. 2 1
19. Phillips screwdriver No. 3 1
20. Phillips screwdriver No. 4 1
21. Combination pliers 200mm 1
22. Flat nose pliers 150mm 1
23. Needle nose pliers 150mm 1
24. Diagonal pliers 150mm 1
25. Thread cutter 170mm 1
26. Round nose pliers 150mm 1
27. Pliers 200mm 1
28. Adjustable wrench 18mm x 150mm 1
29. Adjustable wrench 30mm x 250mm 1
30. Adjustable pipe wrench 50mm x 350mm 1
31. Round head hammer 0.45kg 1
32. Sledgehammer 1.8Kg 1
33. Cold chisel 16mm x 160mm 1
34. Cold chisel 25mm x 230mm 1
35. Pry bar 16mm x 455mm 1
36. Gooseneck crowbar 455mm 1
Follow us