LZYXJZ Emergency Rescue Tactical Kit-Demolition Tool Kit

1. Product introduction:
The emergency tactical kit manual demolition tool is a collection of manual demolition functions such as prying, screwing, chiseling, cutting, chopping, pulling, knocking, tearing, punching, etc. The impact head is made of high-strength tool steel, which can break the door, pick the lock, and go through. Masonry, concrete structure walls and floors, cutting automotive metal sheets and composite materials. This tool is suitable for all kinds of rescue sites, especially for rescue work in the early stage of an earthquake.

2. Product configuration:
1. 15" lock handle: can be used with any tool in the tactical bag. Weight: 1.1 kg.
2. Connecting the lock bar: It can connect two lock handles. Weight: 0.3 kg.
3. "D" type handle: After being matched with the lock handle, it can be used in conjunction with other tools to increase the use force. Weight: 0.7 kg.
4. Nail remover: connected with the lock handle, used to pull up the nails and open the padlock. Weight: 1.2 kg.
5. Metal cutter: Connected to the lock handle, it can cut iron sheets of cars, airplanes, etc. Weight: 1.2 kg.
6. Cross pry: Used in conjunction with the lock handle, it can cut doors and windows, floor concrete, etc., and go through thin iron plates and brick walls. Weight: 1.3 kg.
7. Eagle duckbill axe: Used in conjunction with the lock handle, it is conducive to the use of force in a small space. Weight: 1.3 kg
8. Hammer: Used in conjunction with the lock handle, it can break down obstacles such as concrete, brick walls, and wooden floors. Weight: 2.1kg
9. Powerful rake: connected with the lock handle, it can realize the functions of cleaning up the waste on the rescue site. Weight: 1kg
10. Shark tooth shovel: Shark tooth shape can eliminate obstacles more effortlessly, and is used in connection with the lock handle. Weight: 1.5kg
 
Three, operation steps:
1) First, make sure that the locking handle is in the unlocking position, and insert the connecting part of the product component into the locking handle.
2) Rotate the handle so that the connecting parts of the product slowly penetrate into the locking handle until all the connecting parts sink into the locking handle.
3) Rotate the lock key on the lock handle to the locked position.
4) When connecting two locking handles, use the connecting lock bar and follow the steps 1-3.