1. Application areas:
1. Water rescue: It is suitable for complex rescue sites such as riverside, lakeside, riverside and seaside, and can realize long-distance water rescue.
2. Land rescue: suitable for rescue occasions such as civil, police, military, firefighting, ship-to-ship, ship-to-shore, tall buildings or mountain streams
Rope throwing operations.
2. Product parameters and features:
1. Using compressed air, working pressure: 8.5MP, weight 7.5KG (net weight without base), projectile mass 1.8KG.
2. Throwing distance: The distance of the automatic inflatable lifebuoy when used in water is ≥210 meters, and the maximum distance in land use is 250 meters.
3. Specification of rope throwing: ¢3mm×250/180/150 M, the pulling force of three kinds of throwing rope is not less than 2000N, rescue bomb, rescue rope and water protective cover can be used repeatedly.
4. Air flight time: 3-5 seconds, initial velocity of launch: 60m/s, the water buoy in the water rescue bomb will automatically inflate into a lifebuoy within 5 seconds of entering the water, generating a buoyancy of more than 8 kg.
5. Using high-pressure air as the launching power, there is no open flame, and it can be shot from or into the flammable area.
6. The projectile is equipped with a buffer base, and there is a goniometer on the base to adjust the launch angle, which can make the rescue projectile to be projected closer to the destination and farther. The equipment is equipped with safety button and safety interlock, which is safe and reliable, and the operation is simple and convenient.
7. The thrower is equipped with a vent valve. The vent valve can be used to completely exhaust the remaining gas inside the thrower. At the same time, the internal air pressure value of the thrower can be adjusted through the bleed valve to achieve the ideal throwing state. Ensure the safety of the users (note: more than 8 consecutive launches).
8. The cylinder of the thrower is equipped with an air pressure gauge, which can clearly see the inflation pressure value inside the thrower when in use, so as to avoid the impact of the air pressure being too high or too small to affect the use effect. At the same time, the safety of users is guaranteed.
9. The throwing device is equipped with a rope retractor for rope retracting, which can quickly retrieve the rescue rope and improve the time and efficiency of rescue.
10. The package of the thrower is a golf bag type outer package, which can be carried and carried. It is convenient to carry, which is helpful for rescuers to quickly start rescue work.
3. Standard configuration of long-distance caster:
1. A set of basic launch components
2. A 1.5L gas cylinder
3. One base
4. 2 land-use projectiles (including 250m rescue rope)
5. 2 water projectiles (including 180m rescue rope)
6. Training bomb
7. One Okinawa
8. A rescue bomb launching catheter
9. A training projectile launch tube
10. 3 rope bags (one of which contains 150m rope)
11. 4 16g CO2 cylinders
12. 4 triggers
13. 2 sets of water protective covers
14. A set of commonly used sealing rings
15. Two golf bags are packed.
4. Packing list of ZJSC-230 thrower
Serial Number Name Unit Quantity Picture Remarks
1 Basic components set 1 With gas cylinder
2 bases 1 with angle meter adjustable launch angle
3 Rescue bomb launch tube 1 length 81cm
4 Land-use projectiles 2 Built-in 250-meter rescue rope
5 Rescue bombs for water use 2 Built-in 180m long rescue rope
6 Rope loader 1 length 132cm
7 Training bomb launch tube 1 length 32.5cm
8 training bombs 1 length 45cm
9 rope packs 3 one of the rope packs has a 150-meter rescue rope
10 CO2 cylinders 4 CO2 net content 16 grams
11 Trigger 4 Pay attention to moisture
12 Water protection cover 2 with cable tie
13 Instruction Book 1
14 seal ring 1
15 gas cylinders 1 Optional 1.5L
-
Home
-
About Us
-
Products
-
News
-
Case
-
Support
-
Contact Us